Skip to content , Skip to navigation


FLOOR SCRUB

This cleaning product is designed especially for using through a floor scrubbing machine as it has very low foaming properties and therefore will not cause the machine to activate because of excess foam.  It has very good soil removing properties for the effective removal of grease oil and water-soluble soils.

This cleaning chemical is very economical and is safe to use in all machines. The type of machine used will determine the application. For a smaller machine, mix one part Floor Scrub with 20 parts luke warm water. Spread over the dirty floor and use scrubbing machine to loosen the dirt. Wash away or vacuum up. When larger machines are in use, dilute one part Floor Scrub with anywhere from 5 – 50 parts water depending on how dirty the floor is and add solution to the tank of  the machine.  Scrub the floor, sucking up the dirt into the machine.

As with all cleaning products, care should be taken to limit exposure to the body. Wear safety eyewear and gloves. Should contact occur, wash affected are with clean, running water. If irritation persists, seek medical advice. If ingested, seek medical attention immediately. Please keep out of reach of children. Store in a cool, dry place. Keep out of pathways to avoid accidental spillage

Click here to request a MSDS   

 

 



sitemap